I was playing with this board again to see if I can get it to work in PAL and finally success.
The problem was with the H V Position and H V Size settings.
The main issue is that if you set the NTSC side first then the PAL will be screwed up. So I messed with settings in PAL resolution till I got good picture, then modified the settings that will work on NTSC side at the same time.
My setting for future reference:
H POS 56
V POS 16
H Size 48
V Size 59
So, not bad for $35.
Where can I find one of these?
Tony
wa9yoz@arrl.net
