Wb 3.1 LoadWB freeze

[Bamiga2002]

Let me start from the beginning :-) :

I was installing BetterWB to a newly installed barebones WB 3.1 partition. I was doing this in my main patced up WB3.1 environment. But BetterWB installed right onto this patched up WB 3.1 replacing several files and S-S etc. :/ but I had made a backup just before trying this just in-case :-). So I formatted the partition and then copied all the files back. Before this I decided to change the partition blocksize from 1024 to 512. All seemed cosher, empty partition, copied back the files and then booted.

BUT, now the boot process fails when WB tries to load the desktop view. It displays my backdrop pic and some partition & left-out icons, but then freezes. I never get to see the WB 3.1 disk icon. Mouse moves but nothing else happens. I didn't change a thing in S-S or other. Tried disabling WBStartup, no help. With no S-S and then with just plain LoadWB it still freezes. Luckily my OS 3.9 partition loads up fine so I can try and solve the problem.

Any suggestions here?? I still have some ideas though...

EDIT: posted this also on EAB http://eab.abime.net/showthread.php?p=795457

[Bamiga2002]

BetterWB was installed accidentally on my "patched up" Wb 3.1 setup, not on the barebones 3.1 one. But I restored the patched up Wb-partition from my backup simply by copying it back, so nothing should have changed there. Everything should have been as if no BetterWB installation had ever been made.

[Bamiga2002]

I'm using PFS3 on all my partitions. Will try setting blocksize back (dunno why it should matter..) and doing a full format, now I just did a quickformat.
AND no hardware change in-between and the backup was made from a fully booting/working WB 3.1 partition.

[Bamiga2002]

OK formatted the partition again and changed block size back to 1024 (shouldn't matter with PFS3 anyway), then copied back all files. Then ran PFSDoctor and also Diskvalid, no errors found. Still the same. However...

I had set my PPC memory to fastest possible earlier in the ppc-bootmenu (just for speed tests), but I remember having set it back to 60ns. But the setting wasn't saved there, so I can only guess that this faster memory access has MAYBE corrupted some files during backup copying. Damn! Even setting it back to 60ns the freeze happens anyway...

But no worries, I finish my BetterWB installation and make that my main WB 3.1 partition . I don't mind setting it all up again (WarpUP, Picasso96, Mediator etc.), tinkering is a major part of the Amiga fun! :hammer:

[Bamiga2002]

FYI it was task/process "Workbench" that was crashing.

[Bamiga2002]

I have the safe Maxtransfer setting of 0x1FE00 on all my partitions. My HD is connected to my BlizzPPC SCSI so it shouldn't care about that setting anyway I think. But better be safe than sorry.

EDIT: mask is set to 0x7FFFFFFE, should it be 0x7FFFFFFC?

[Bamiga2002]

This is kinda solved. I'm not touching the old WB 3.1 install anymore so good riddance to it!