Hello
I've just received two PPC accelerators (Blizzard for my A1200 desktop and CyberstormPPC for my A4000 desktop)
I can help you with the Blizzard PPC.
So, my questions are:
1. Both systems have 16GB CF cards installed. In what way should they be partitioned? I currently have a 1GB 'Workbench' partition, 1GB 'Apps' partition and the remainder as a 'Games' partition. I would like to keep it reasonably similar if possible from the 3.9 point of view but maybe I need to rethink this a little. I would like the default OS to be 3.9.
You can't use the onboard scsi on BPPC with OS4.0 (it doesn't include a driver), you have to use the internal IDE or get a Fast-ATA (or similar) as i did. I always make the first partition >2GB just in case.
2. What tool should I use to partition? When doing a new install I usually use HDToolbox on the 3.1 install disk to create 'Workbench' and 'Apps' then create the 'Games' partition once 3.9 is up and running. I usually install 3.9 over 3.1 as I never had any luck with the Emergency Boot Disk.
2. Do I install 3.9 or 4.0 first?
You could first install OS4.0 and partition the CF with PartitionWizard for both OS3.9 & 4.0. But don't touch the OS4.0 partitions later with OS 3.9 HDToolBox (it COULD fuck up the partitions, not sure though).
3. With the 060, can I install 3.1 like I usually do or not? I seem to remember reading that the 68060.library was needed or nothing would work. Not planning on installing 3.1 (just 3.9/4.0) but was wondering all the same.
You can install 3.1 normally, see your PM :-)
Any tips greatly appreciated as I'm definitely beyond my 'comfort' zone here
My apologies if my questions are noobish or technically stupid but hopefully the replies will clear it all up for me 
Thanks
No prob!