Hi,
I recently bought a IDE to SATA adapter (delock). I want to replace the old IDE drive in my amiga 4000.
I tested this with a standard laptop SATA drive and its works like a charm. But since 500gb is bit of overkill, i tried a 128gb SSD.
HDToolbox (OS3.9) seem to work, i can initialize the drive, and i can make partitions.
When i make a partition bootable, my amiga wont start, HDD led stays lit after some time. I think it tries to read the partition info since i hear the amiga load from disk.
When i dont make a partition bootable, i can boot from USB on my deneb (wich contains a copy of my WB3.9 partition 
I can format, but it go's wrong when i want to read or write to the SSD.
Can this be the type of SSD used? The SSD i used is an Intenso 128gb.
I had exactly the same issue with my 1200 + Sata adapter...
