Warp Up And Power Up Problems

[lempkee]

i need a whole lot more info before i can tell you , what os are you running and what gfx card etc.

beyond that...

getting wos to work on my setup required me to update the rom ...
(old one wasnt mediator compatible)

cheers

[lempkee]

should be the same with and witout blizkick aslong as you have bppcfix installed..

this is a "madmatt" call really.. i will message him and let him help you

cheers

[lempkee]

warpos 5 is what you choose , then forget PUP for a while.

boot the system up (in working WOS)then you put the ppc.library up in Libs: and open blizkick with bppcfix.

before you reboot now , go to sys:prefs/warpos   and set terminators to what madmatt said.

hope that helps, also dont go crazy over pup, alot of the pup stuff doesnt even work .
but some stuff works, so i know pup is up

[lempkee]

Blizkick * EXTRESBUF=1225943 QUIET MODULE SpeedyIDE SpeedyChip bootmenu romfixes NoClick romupdate.idtag filesystem.resource FixGetMsg console.device ram-handler exec.library BPPCFix


here is an example of my line , but anyway
u need to check closely as this is a patch/hack to be suited best for every system , ie some systems will be damned slow with my setting...or great (like mine)

cheers

(i messaged u earlier, didnt u get it?)

[lempkee]

that line "MUST" be before SETPATCH!!!

and setpatch must have this line:


C:SetPatch QUIET NOROMUPDATE


in an example , this is how my startup-sequence looks like.



; $VER: Startup-Sequence_HardDrive 45.2 (19.1.2001)
; Startup-Sequence for AmigaOS 3.9

Blizkick * EXTRESBUF=99943 QUIET MODULE scsi.device SpeedyIDE SpeedyChip shell romfixes NoClick romupdate.idtag filesystem.resource FixGetMsg console.device ram-handler exec.library BPPCFix


C:CheckLMB
IF WARN
SYS:Prefs/ATA3Prefs
ENDIF
C:ATA3.driver QUIET



PsdLoadModule DEVS:input.device QUIET ;Added by Poseidon-Installer

resident run remove
resident c:run ADD PURE


C:SetPatch QUIET NOROMUPDATE

C:mcpramlibpatch
C:StackAttack MIN=150960 ADD=150960

[lempkee]

forgot to say, this way it will require 1 reboots.


first 1 is blizkick installing , then it will reboot auto , then it will load up my fastata prefs and setpatch , but since i dont use update (have all in blizkick) it wont reboot again.

also , you should make sure that you can actually use speedyide , also speedychip is for 060 systems ONLY.

hope my posts helps u.

cheers

[lempkee]

framiga: well ermm mcp ramlib patch is for thoose who doesnt run MCP  , you missed the whole point i guess..

i dont run mcp so i run the ramlib patch.

easy as that.

cheers

[lempkee]

cu: pup is hard, ppc is hard....

amiga amp works best in wos mode, mame pup is the fastest we got and works fine under pup emu.

also i think i have found maybe...10-20 prods that aint wos pup emu ready (working) , but there is alot to take care of before you know for sure that it wont work..

about mame , that crashed here also in the start , dont know why..but i downloaded a new file from the mame site and now it works fine (with menu etc).

the best way to test pup emu is by running pup tools , but seriously i can't recomend much.

why i said wos is what u want to use anyway...

be sure you have enough free mem when you run mame + make sure you have unzip ppc version if you dont ...well it will crash or be very slow..

cheers

[lempkee]

sorry , was abit fast...

i meant RTG + FAST RAM , if any of theese go below "what ever the Minimum is" then it will give you an WOS EXCEPTION under pup emu..

REALLY Annoying...

on CGFX this is impossible to tell as there aint any RTG mem indications , so when you run it for a testing , use low res on wb and no backdrop and make sure your mem is as clean as possible.

cheers

[lempkee]

email sent.

though u should try and grab any demos etc from ppc demo database (the one i am maintaining..)

cheers

[lempkee]

0 = off yes .

in the gui anyway, but if u check the text file it generate , then it will say 0  ...

about your pup issues , well heh arrgh is the first word that pop's into my head.

many things can be the reason really, but if u got all settings correct then it should work , so then it might be other problems like...not enough mem/rtg etc and ofcourse wrong versions of libs etc , also you never told me what that error was,
do that..

remeber u normally need Runelf and such to start a pup ####e


goodluck..

[lempkee]

doh! ofcourse...i forgot about that one....have it installed though ... heh!

[lempkee]

dood , use shell / cli

works fine then ..

beyond that..if u want to use icons , go to icon information and set correct info in it ..

and read the readme

cheers

[lempkee]

great , but i could always send you mame pup ...but ERRK its big so email me and say its ok to get a 5+ meg email..

cheers