FastRAM board with a place for 4M x 16 bit DRAM chip + XC9572 tqfp100 cpld.
DRAM IC is 5 volt KM416C4104C, which could be found on some EDO SIMMs.
It is not yet verified that these will be working, but I think they will.
I think it's fair to inform that they will not work after soldering up the components; the CPLD needs to be personalized with the code, which (as far as I can tell) is not available just yet.
"Current state: not yet finished. Cpld code needs to be prepared.."
