Hello, i´m finishing an Amiga 4000 tower proyect.
One last detail i get i´am using currently a hacked amiga 500 keyboard connected to the 4000 port.
But i can´t reset from the keyboard the pinout at hwb don´t mention any of the pins as reset?
When i press amiga amiga ctrl the caps lock led flash 2 times like sending the reset signal but i have the reset pin disconnect so no reset.
1 /DATA Data
2 n/c - Not connected
3 GND Ground
4 +5V +5 Volts DC (100 mA max)
5 CLOCK Clock
6 n/c - Not connected
The amiga 500 keyboard connector use pin 3 as reset line.
How the amiga 4000 original keyboard reset?.
The pinout at hwb is ok ?, or one of the n/c lines is keyboard reset?.
Theres some hack or mod to add a reset switch connected to the amiga 4000 motherboard ?.
Thanks
:-D
