Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: Transferring files  (Read 2339 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline SilvrDrgn

  • Hero Member
  • *****
  • Join Date: Feb 2002
  • Posts: 1215
  • Country: 00
    • Show all replies
    • http://mikerye.ddns.net
Re: Transferring files
« on: April 16, 2004, 02:53:10 PM »
Hook both hard drives to the A1200 at the same time.  Simply copy between them after you partition and format the new one.
Logged
Michael
 

Offline SilvrDrgn

  • Hero Member
  • *****
  • Join Date: Feb 2002
  • Posts: 1215
  • Country: 00
    • Show all replies
    • http://mikerye.ddns.net
Re: Transferring files
« Reply #1 on: April 16, 2004, 06:26:52 PM »
The floppy port is not IDE.  You do not hook hard drives to it.  You need to have an IDE cable with three connectors on it.  One for each of the hard drives, and one to connect to the IDE port (not floppy port).
Logged
Michael
 

Offline SilvrDrgn

  • Hero Member
  • *****
  • Join Date: Feb 2002
  • Posts: 1215
  • Country: 00
    • Show all replies
    • http://mikerye.ddns.net
Re: Transferring files
« Reply #2 on: April 16, 2004, 08:16:39 PM »
Yes.  You're going to need either one or two cables depending on the connectors available on each.  If using two cables, then you're going to need one of those buffered IDE hardware add-ons like PowerIDE (or called something similar to that).
Logged
Michael
 
Pages: [1]   Go Up
« previous next »