quicknet 2000 card help what can l do with this

[actung_bab]

hi l got this card with amiga 2000 l brought last year
is it quick just kidding l was hoping to get internet connected with this card is this possible

do l need speacial software l have miami dx
am rading about on amiga hardware page still confused

my router has only the flat cat 5 plugs this old card has the round coxail plug been told you l canot use it . but my pc has this type plug also so was wondering if l can netowrk to pc and then get intenet that way sounds far fetched l know

.

[actung_bab]

thanks buddy my best freind runs electronics company so l have to be best behaviour am not best with solidering iron.

thanks for that help

 :-D  

am looking forward to getting amiga 2000 online :-D

[actung_bab]

thanks for that its got round old style plug and 15 pin seria; like female plug next to it whats that transceiver
thingy do am more confussed (doesint take much)

thanks for the info am not good with solider iron
last time tryed take out battery droped iot on floor 2 times nearly burnt my hand not good. :-D

[actung_bab]

thanks for that looks like just what l need thanks very much

its knowing if l can get one these in new zealand

 :-o

[actung_bab]

thanks lggy at the moment went got another termintor for the old style bnc round cable so going try going from the pc card to the amiga quicknet card and first try out to see the card works okay its in the amiga 4000 know so is showing up in the early startup as board

trying out this program fileZilla server and try amiga ftp on the other side that way l can get files to amiga from the pc

its bit of mission as l have to get ibrowse and mail program on the amiga 4000 not using floppys as l cant format floppy disk athough it reads them fine aghh it be okay when its done

that way l dl the quicknet.device driver to the pc

 :-D

[actung_bab]

yes thanks for that yes l remember from way back yes.
my pc has old pci e4arthent with both conectors and the mb
has inbuilt earthenet port so switched to using the inbuilt for intenet and the pci card to run the round cable to my amiga quicknet card

thanks for the help iggy

[actung_bab]

hi l have the card and the QuickNet.device in devs
qwestion when run Miami init it finds several devices
quicknet q2000 device 0
goes to unit 4
and then other Commodore/cei/ A2065

only l can use is the quicknet QN2000 unit 0

l know theres switch on the back for the inbuilt amiga networking but l just want network to a pc to tranfer files

[actung_bab]

just trying work out how to set up ftp server or ftp client
on the amiga have it connected to the pc know

[actung_bab]

l found this very unit my modem or router dont have this 15 pin aui connector but the quicknet card does l belive so l assume l can conect directr to the amiga card itself then run
a cable to my switch

Iggy_Drougge wrote:
An ethernet transceiver connect to the 15-pin AUI port and has another ethernet connector on the other end. It looks like this.

[actung_bab]

thanks zak l got bid on the centreCom 210TS so that good
thanks for the help appreicated my freind

Zac67 wrote:
Yes, the transceiver connects directly to the AUI port and then you've got a TP port like the rest.
Transceivers exist for various media types, the one you need is called TP, twisted pair, RJ45 or 10BaseT; they start as low as $1 on ebay, CentreCOM 210TS are very cheap around here. Don't get one of the Apple flavor, they've got "mini-AUI" and won't fit.[/quote]