amiga 2060 card not working

[actung_bab]

hi l brought one these cards as not working
l have tryed it in my amiga 2000 cr model and just boots from
the orginal 68000 cpu
l have idea the cpu is broken but even if the card was broken shouldint it try and work first of the new card

also does anyone know email adress to contact amiga france or know of good amiga repair biz or person.

many thanks

[actung_bab]

thanks for helping l should have but the full details
its a dce made blizzard 2060 cpu card with onboard scsi
l am trying to get it going on a amiga 2000 with 2.0 roms
l am going try adding a 3.1 rom .



 :-)

[actung_bab]

thats awsome yes been reading the manuall hehe
yes thanks will do that know

[actung_bab]

well l read where u can make this card work in a amiga 500 that has l forget but it can be done hehe

speaking of which l brought a 3.1 rom of ebay and when hold down the mouse buttons l get werid kinda hand drawn screen
what gives has someone just made up these ?

says AmigaDos on 6800

     AmigaDos on 020

      AMIX

l assume maybe this is the 020 commodore card but usually us can see boot from startup seqwence etc and to disable or see what cards are there . am confussed

l have no idea weather this 3.1 rom is at faulty or the 2060 blizzard card is broken.

when l click or either the first two it just flickers on the
red power led and crashs then boots to hd.

also if l take out the 020 card it wont boot at all even though the 6800 cpu is still on the mb does this mean the cpu is broken.

many thanks

 

[actung_bab]

CLS2086 wrote:
Hi,

if you plain to resell this 2060 card, PM me.
okay will do was sold to me as broken so say it is . but l dont know for sure.
Take all cards out

Just leave the mobo alone without floppy and keyboard connected, but with mouse.
Try to unplug and replug the internal PSU connector, and try to clean every socketed chips and theirs socket with an electrical spray cleaner.
Look under the mobo if you have some track broken.
yes l will do thanks for the advice l look at this on thursday my day off
Then retry to enter in the early.

For me the PSU can be faulty too. Try to read its levels.

:-)