IVS Vector 030 jumper settings?

[Liber777]

Hello,

I just installed a Interactive Video Systems Vector 030 accelerator in the CPU slot of my A2500.  This card has Trumpcard SCSI, which I'm not planning to use for now.

When I boot the A2000 it hangs on a white screen for a very long while and then finally boots from the hard drive on the GVP card.   I'm guessing that the system is either polling SCSI devices on the Vector or looking for a boot device before finally giving the nod to the GVP card.

I think I need to disable the autoboot capability of the Vector and possibly disable its SCSI as well.  I checked both Amiga-Hardware and the Amiga Hardware database, and these jumpers are mentioned, but not identified.

Can someone here help me?

Thanks...!
Stivan

[Liber777]

Thanks!  I'll try it tonight and let you know.  Is that just for the autoboot?  It looks like the 4th pin pair is JP19.

[Liber777]

.delete

[Liber777]

.delete

[Liber777]

Hi.  I tried that and my 2000 no longer hangs and boots right up.  It recognizes the 68030, but it does not see the fast RAM on the board.   If I let it take the roundabout way and boot with the jumper off, when it finally comes up it sees the memory just fine.  Do you have an alternate jumper setting?

Thanks for your help...!
Stivan