Ratre's Auto Switch with Indivision AGA MK II-CR

[Ratte]

@Shamron:
contact highpuff or gseb on amibay
normally this two members are doing some sort of massproduction ...

@Acill:
the Switch is designed to work with 5 Signals
v-sync, h-sync, r(ed), g(reen), b(lue)
they are analog

the mk2-adapter (for the indi-mk2) is just taking the analog Signals from the indivision (plus some sort of electronic-protection)

[Ratte]

http://www.a1k.org/forum/showthread.php?t=30447
optimized p96 settings for all supported p96-gfx-cards

[Ratte]

zipped lha archive with p96 vesa settings
backup your "devs : picasso96settings" file and replace it with the file from the archiv.


some detailed informations can be taken from this english "how-to"
http://www.amibay.com/showthread.php?31230-p96-new-res-rough-guide-(with-radeon-install)&p=325905#post325905

[Ratte]

Why should I do that?

If you follow the development, you will notice, that the vampire target is a standalone system.
(MiniMig replacement with AGA + 060 power)

It is currently a lite version from the natami!!!

And after a while they add AGAplus ... and there will be standalone System without amigahardware.
No need for a switch ... you can smash your classic in the dumpster.

Other People should call it copy of FPGA Arcade Amiga AGA ... compare it.
http://www.fpgaarcade.com/news/
(AGA with 64MB chipmem .. and working!!)



btw. i allready have the required chipset for dvi ... but i have no time.
on the other side, try Marios solution
http://www.mfilos.com/2016/06/a600-rattes-auto-switch-working-on-my.html