23703jim wrote:
say i wanted to put a harddrive in a 1000 is this possible?if so by what method? thanks
Years ago, when running my A1000, I had a C Ltd controller that attached to the expansion port on the side. As many have already said, this is the same expansion as the A500 just backwards. The C Ltd controller used a 25pin scsi connector on the backside that I connected to my 100MB hard drive. Ran quite well for several years (1989-95) until...
further can the rom(s)be upgraded to negate the use of two disks to boot the machine up.?
thank you very much :-?
I attempted to add the ROMs. Not that adding the ROMs was an issue, but I already had an internal 1.5MB expansion card connected through the 68000 socket and the ROMs needed to go through it also. The height of the two (2) expansions made it impossible to close the box and handle the RF radiating from the box.
At that point, I decided to purchase an A3000.
jerry
// Jerry Heyman | "Software is the difference between
// Amiga Forever :-) | hardware and reality"
\\ // heymanj@acm.org |
\X/
http://bellsouthpwp.net/h/e/heymanj/
