Welcome, Guest. Please login or register.

Author Topic: Amiga 500 PAL display on LCD?  (Read 1924 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline uncleted

  • Full Member
  • ***
  • Join Date: Aug 2006
  • Posts: 107
    • Show all replies
Re: Amiga 500 PAL display on LCD?
« on: September 06, 2006, 04:41:47 PM »
I just bought one from them yesterday, although I can't find a link to the product anymore - maybe I got their last one?

Unfortunately it's also an A1200/A4000 only product.

You might be able to get a Toastscan external adapter from Software Hut, assuming you can actually contact them.

Also bear in mind a scandoubler/flickerfixer won't adjust the 50Hz PAL rate, which many LCDs apparently can't sync to, so you'd probably have to force your Amiga into NTSC mode.
 

Offline uncleted

  • Full Member
  • ***
  • Join Date: Aug 2006
  • Posts: 107
    • Show all replies
Re: Amiga 500 PAL display on LCD?
« Reply #1 on: September 06, 2006, 09:05:38 PM »
PAL is 50Hz - the majority of LCD monitors advertise syncing down to 56Hz.  You might get lucky and your LCD will sync that low, but it's more than likely that it won't.  There are a few LCDs that will do 50Hz, often LCD TVs if you're in a PAL region.

Depending on your chipset and Kickstart ROM, you can boot into NTSC through software.  There are also hardware mods possible.

NTSC brings problems of its own, given most games were made for PAL, also some games AFAIK will force PAL by themselves.  Since it's 60Hz though, it should display fine on LCD monitors.