DKB Wildfire Manual?

[Rabbi]

I've got a manual, since I've got the WildFire060 in an A200.  It's a 16 page manual + the cover.  The most important thing you need to know is that you need a KS 3.1 chip in your A2000 for the WildFire060 to work.  N.B.:  This card will let you connect natively to Ethernet 100.  The only native h/w Amiga card to do so.

[Rabbi]

ArcticSon wrote:
Hi Rabbi,

All set with the 3.1 ROM here.

I am taking out a Tekmagic 2060 and putting in the
Wildfire.  Do the Wildfire's instructions call for
stripping out any existing accelerator's libraries/software before attempting the Wildfire060
install?

Thanks!

I couldn't find anything, but I think that it's a good idea to make a back-up of your Workbench partition (onto a CD, if you could).  I'd also move any duplicate or older versions of libraries to STORAGE directory, making the same directories those files were in.  Always be sure to use the VERSION ... FULL command on both what you think it the older version versus what you thing is the newer version of the file to ensure that you don't wipe out a newer version with an older version by accident.

I will try to scan in the manual this weekend for the Big Book of Amiga Hardware.