3000T will not boot [SOLVED]

[Vlabguy1]

Glad to read about your sucess in solveing the problem..I hope the have the same
with regards to my A4000T problem..

Good Luck and take care

Rich

[Vlabguy1]

gdanko,

My 4000T seems to not be able to output display to my CV64..and all
drivers are current and in the right place.  I have tested the card elsewhere
and she works just fine.  The tower is an 060..and all files are installed
correctly..ie the libs files are just fine.  All the normal amiga modes work..
sys info shows card being present and working..just when I go to switch
modes I get nothing..Oh and I seem to have a 12v loss on my Serial connector
on the back of the machine..and I think these problems are related somehow..

there you have it in a nutshell..

thanks for asking
Rich

[Vlabguy1]

gdanko..

I will check that out..thanks for the info..

Rich

[Vlabguy1]

@gdanko,


Thanks again for all your help..as far as testing all the Zorro slots..I did
test the CV64 in all the slots and same result.
I will have more time this weekend..to devote to my 4000T..and I hope
it is something simple like the PSU..and not some leaky Caps..doing
damage to my motherboard..

Take care and have fun
Rich
from
NY

[Vlabguy1]

@gdanko and T3000

Nice to see some USA boys...and thanks for all the info..and this all
might help my A4000T.

Again thanks.
Peace and take care
Rich
from
NY

[Vlabguy1]

Maybe someday again..!!!

Rich.