Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: Blizzard 603e + BVision Power Problems?  (Read 4718 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline amiga92570

  • Hero Member
  • *****
  • Join Date: Aug 2006
  • Posts: 1005
    • Show all replies
Re: Blizzard 603e + BVision Power Problems?
« on: July 06, 2009, 11:36:44 PM »
Amiga center, 240 eur for 040 to 060 upgrade.

Have you tried holding ESC key and see if you get the blizzard config menu?
Logged
Amiga92570
==========================
(1) 4000T/040 (2)3000t CS 060/233ppc Picasso IV video, (2)D-box 1200 blizzard 060/200ppc Mediator fastATA, (1)amiga 1200 Power tower, (1)amiga 1200 EZ tower with mediator,1200/030/50mhz, (3) amiga 500 with CSA Mega Midget Racer and Trump card AT, (2) amiga 600 one with M-tec 030, (3) CD32 one sx32, two sx32-pro, More accessories and parts than I want to admit to
 

Offline amiga92570

  • Hero Member
  • *****
  • Join Date: Aug 2006
  • Posts: 1005
    • Show all replies
Re: Blizzard 603e + BVision Power Problems?
« Reply #1 on: July 07, 2009, 02:34:34 AM »
Try what delshay said, specifically pulling the card out a little bit. Sometimes the connector can get loose. Also clean the motherboard card edge with cleaner to be sure there is good connection.

If you shorted something or the 68XXX is dead the card will not boot. I tried a blizzard and without ram I can get the boot menu.
Logged
Amiga92570
==========================
(1) 4000T/040 (2)3000t CS 060/233ppc Picasso IV video, (2)D-box 1200 blizzard 060/200ppc Mediator fastATA, (1)amiga 1200 Power tower, (1)amiga 1200 EZ tower with mediator,1200/030/50mhz, (3) amiga 500 with CSA Mega Midget Racer and Trump card AT, (2) amiga 600 one with M-tec 030, (3) CD32 one sx32, two sx32-pro, More accessories and parts than I want to admit to
 
Pages: [1]   Go Up
« previous next »