Internet on efika

[zyphoid]

doubling up between forums!

I have an issue with getting the efika on line.  i thought that you just plug the ethernet from the router into the front jack, but it's not connecting to the internet.  i'm using a verizon dsl wireless router.

[zyphoid]

@piru thanks. I was hoping you would help, not sure, will check later. running vista, what's the best way to locate it?

[zyphoid]

@ Piru vista yea that's why i asked
but i got it

If your network supports DHCP, it should work just after plugging. If no, you need to configure the network interface first.

trying the bridge now

[zyphoid]

doing this all from sputnik now not bad first impressions, umm...good!
getting to (our pages) well
bad news on the bridge(linksys wet 54g v3.1) do a search for a link I don't
get how to copy and paste yet.

there is no connectivity! I was hoping to illiminate having the cord stretched all over the floor
tripping hazard and all!
I'll use "vista" to edit and post a link to the bridge i'm using

first of many more posts from sputnik :-D  :crazy:  ;-)  :roll:  :-)

edit: http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=1533889&CatId=1594

any clues?  It just seems a great solution for this setup
I know it's got to be a configure issue!
Any clue Piru?

[zyphoid]

i'm thinking it needs a driver to tell t what to do

AmigaHeretic wrote:
Have you tried plugging the bridge into the Vista machine to see if it works there?

seemed pointless besides i had to install the drivers, and the laptop have built in wi-fi

Don't get mad for asking what may be a dumb question, but you of course logged into the bridge already from a browser on the computer that the bridge is plugged into, using it's IP address in the URL area- 192.168.1.226  ( the user name is probable blank and password is 'admin' on that thing) and configured it to connect to your Wireless modem with any WEP or WAP passwords if you use them?

got to the authenticate screen, but admin was rejected so it didn't proceed any further.


the connection is unsecure

[zyphoid]

ok online with the tech people.  it does go to a linsys setup screen with stutnik, but pops up te user/pass screen several times (js i presume) after a point it stops to alow imput. I cant get further.  stuck between being defective or needing firmware getting firmware...working on it y'all

also trying it on vista as per suggestion
funny thiing is no better luck there either :-)  :-?

[zyphoid]

hopefully you have been following the thread because it does work!!
spread the word. Keep persisting til you get someone to configure it
yep on the vista or xp.. once it works there..it will
work on your efika
fun time is here..... :-D  :-D  :-)  :idea:

[zyphoid]

@Zetec-S

You tried running CD-Rom games yet?

Every game locks up the system, none of the cd32 games ran
 :-? froze during access :getmad: