hi recently i have been having issues with the paula audio. it all started when i set my a4000 up which contained additional hardware such as csmk3, picasso 4 and the 3.5 hd and cd rom drive. when i first set this up i had no trouble whatsoever with paula audio - i can conforim this as i tried octamed out when i first got it. but a day later i returned to octamed to discover that i was getting really low volume audio output (but not fuzzy). on advice, i was told it could be a psu unit power problem. so i unplugged the cd rom drive and hd, but not the accelerator and picasso iv and tried the octamed again. this time i got perfect paula audio output. i thought then that it was indeed a psu power problem. but today i decided try the above without the hd and cd rom and also without the picasso. instead of the picasso i used my flickermagic and bmon adaptor. i tried octamed out once again and to my horror i now only get paula audio output on the L (left side), absolutely none on the R (right side). i also tried other apps that produced paula audio output and get the exact same result as before. now i have taken out the flickermagic and bmon and reinstalled the picasso - and as if by magic i get perfect audio again! so my question is, is my paula audio buggered or is this the act of strange psu power behavior?! anyhelp guys?
