1084 Cable Pinout Question for custom cable

[meega]

In that list:

Pin07 combined Sync = combined Horizontal/Vertical scan control signals, the ground for that wire is Pin01. Those two wires make a circuit. Do NOT connect any of the RGB to Sync - it won't help at all...

Pin02 is the one and only ground wire for the three colour signals. So each of R, G, and B form a circuit with the common ground.

[meega]

According to the information that you have provided:

1------------------------------1
2------------------------------2
3------------------------------3
4------------------------------4
5------------------------------5
6 NOT CONNECTED 6
7------------------------------7
8 NOT CONNECTED 8
9 NOT CONNECTED 9

[meega]

how is this connection made?

There is a monitor on one end of the cable...