You'll want to get an accelerator board since an A600 can only add about 4 megs of RAM via the PCMCIA slot. With an '030 accelerator you can add much more than that since the '030 has 32 bit addressing.
ailing that, (which is highly probable, A600 accelerators are fairly scarce) you should immediately buy the 1mb chip mem expansion for the a600 if you don't have already, and seek a cheap PCMCIA Sram card for fast mem.
jens shönfeld of individual computers was working on an accelerator board for the A600, but the last news was that the project halted after (?) production. Most probably due to a bug found in the boards.
amigakit wrote:
Welcome to Amiga.org!
If your A600 doesn't have a full 2MB of chip mem (graphics memory) then you can upgrade with the A602 memory expansion. It will also give your A600 an A1200-style clockport header which opens other expansion possibilities (e.g. Subway USB)
If you wish to add Fast memory you can upgrade with 16-bit SRAM memory card
Hope this helps!
Sorry for my delay, i had a deep search on net, and i know in my A600 i can have 6 mb (2mb chips + 4mb pcmcia) without any accelerators, that it is very difficult to find.
but one of my dout's its if A602 memory expassion, its compatible with my amiga. (@amigakit please not intrepete badly my question)
once again sorry for my badly english
