Welcome, Guest. Please login or register.

Author Topic: 3.0 ROMs in amiga 2000?  (Read 2423 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline save2600

  • Hero Member
  • *****
  • Join Date: Jul 2006
  • Posts: 3261
  • Country: us
    • Show all replies
Re: 3.0 ROMs in amiga 2000?
« on: April 04, 2010, 04:03:59 AM »
Quote from: runequester;551217
My 2000 has 2.0 ROMs in it currently.
Is it possible to install 3.0 ROMs in a 2000 and would it be worth the effort?
What does the actual process of replacing ROMs involve?

Yes - replace the 2.0 ROMS, but skip 3.0 and go for 3.1 (unless you happen to have 3.0 laying around begging to be used, but even then... nah).

What's involved is actually a pain in the ass. You have to remove ALL of the screws on the drive/power supply cage (at least 7 of them), unhook the power supply. Unhook a hard drive if it's sitting in a floppy bay. Unhook the floppy connectors and lift that beast out of there. Then you have to located the Kickstart chip next to the 68000 and yank her carefully and then insert your Kickstart chip made specifically for an A500/A2000.  

Reassemble and install Workbench 3.1  :)  

Of course, some may ask what you want to do with the machine.... if you're only going to be playing games off floppy, sure - maybe leave 2.x in there and forego all the hassle, but the installation of 3.1 will open up many a new door of opportunity for your machine in the not so distant future  :)
 

Offline save2600

  • Hero Member
  • *****
  • Join Date: Jul 2006
  • Posts: 3261
  • Country: us
    • Show all replies
Re: 3.0 ROMs in amiga 2000?
« Reply #1 on: April 04, 2010, 05:17:07 AM »
Nope, you're just as screwed using 2.x as you would be 3.x when it comes to games. If something doesn't work, try holding in your two mouse buttons on startup and change the graphics to OCS.

Otherwise, I do know of a disk that magically transforms your 2.x or 3.x to boot into a REAL 1.3 scenario. This is handy if you have a floppy based system only. If you're eventually going to go the route of CD-ROMS and HD's - then back to the top of this thread you go!
 

Offline save2600

  • Hero Member
  • *****
  • Join Date: Jul 2006
  • Posts: 3261
  • Country: us
    • Show all replies
Re: 3.0 ROMs in amiga 2000?
« Reply #2 on: April 04, 2010, 05:58:51 AM »
Quote from: runequester;551235
Thanks for the tip! My old machine back in the day was a plain A1200 so the 2000 is a bit of new ground for me.

The disk you are referring to is that relokick or something else?


I'll bear the advice given in mind, once I get the urge to build this system out more


Yep - Relokick should do the job  :)