cyberstorm mkII and cybervision64

[pierre]

2 part question.

1,)
 my old cyberstorm mkII shows up as a 040 with nor fpu. I can remember this showing up as a 060 with fpu years ago....  
I installed the driver that came with the card.... so I have the 060 lib. I can feel the speed up with board in there it just the cpu shows up as a 040 and all my funn fpu software won't run
2,)
I can;t get my cybervision card to work with the 060 pluged in?  What gives they both work..

any help would be great!




my box is
4000(d)
3.1 os
toaster 4000
flyer

[pierre]

i just used the cpu command!  Where do I get teh latest 060 libs?  which is the better software cybervision or picasso95, I think I have the cybervision soft but where can I get the picasso soft?
thanks!
Pierre

[pierre]

amigaites:

its not a 040, it is an o60
( don't have the box in front of me here at work!)
the origional 040 DOES have a heat sync!
anyway, I have several 060 at home, I will post them later.
the machine is open..... until I can sort this out no sence in closing it...
it just wired that they show up as 040's rahter the the 060 they are, so I was wondering is this a software issue. I run OS3.1

again thanks you guys are great!
Pierre

[pierre]

cpu060 caims that no 060 is available and that I should upgrade!  I can feel the speed if the 060 the boot is real, so is the lack if fpu.  the funny thing is that whe I swap back the to 040 (with fpu also), the fpu support is not there, it line the 060 lib is no good or something?

thanks!
Pierre

[pierre]

I have run the CV64 in my 4000er just fine, until I plug in the CS MKII!
Sofar I can get the CV64 to work in my 3000er, but I may need to try some more.
thanks!

[pierre]

It was late I typed wrong, the CV64 so far has NOT worked in the 3000er only in the 4000er.  I will try the jumber to see if it will work in the 3000er.  The issue in the 4000 is that it stops working with I hook up the 060, I think its software!   SOfar thanks for all the suggetions.  I need new ideas as I haved tried everything I know....

[pierre]

I upgraded to 3.9. Now both showConfig and cpu show an 060 with mmu.  What I'm missing is the FPU!  I have 2 060 chips one is a XC68060RC50 and a XC68060RC50A, does anybody know if they have the fpu.  when the 060 card is installed I can't run systems apps such as "screen mode", the OS complains about some 44 lib?  On the other hand be removing the card and 060 lib II have installed the cv64/3d in the amiga 3000 and it worked. Wish I had the video/flicker module! So the isue is the phase5 mkII 060 board/CPU or software...   If you have seen this type of this let me know. thanks
Pierre
(ps until I get the 060 CPU fpu issue sorted I can't run the CV64/3d and the 060...this sucks I am very close to having a killer setup)

[pierre]

whats this boing bag?  where do I get it? Also many thanks for the help so far, I have some things to try when I get home....
anybody have a cv64 (not 3d) that theywant to sell/trade?

Pierre

[pierre]

thanks everybody!, great success!  Fully loaded!
A3000(d)
Phase 5 CS MKII 0600/MMU/FPU!
DPS PAR
sunrize516 audio
amigaOS 3.9, with boing bag 1 and 2.....
still need to configure the network card...
I could not have done this with out the help on the great forum!

thanks
pierre