Yes, it's a 1st rev of a Linksys card. It works with WPA2/AES after firmware update.
Try older drivers first - Prism2 ver. 1.7
http://aminet.net/package/driver/net/prism2According to the docs you need to put Setprism2defaults in your User-Startup:
SetPrism2Defaults SSID mynetwork NOKEY
IF it comes to Prism2v2 ver. 2.6
I'd try in Wireless.prefs
network={
ssid="mynetwork"
key_mgmt=NONE
}
Check if you have WirelessManager in your U-s already. If so, put a semi-colon in front of it so that you can later on use it from CLI by typing in:
C:WirelessManager prism2
Ignore the leds for the time being.
@utri007
You cannot upgrade Orinoco to WPA2/AES and it only supports WPA/TKIP and your router has to be set into this mode only. No mixed mode or TKIP + AES otherwise it won't work. A lot of routers do not allow this mode anymore, which is a pity
@Thread
If anyone is interested in PCMCIA WPA2/AES cards then have a look here or PM me. I still have some of them for sale.
http://www.amibay.com/showthread.php?81221-25-x-WIFI-CARDS-LINKSYS-WPA2-AES-AMIGA-A600-A1200-PCMCIA-WIFI&highlight=linksys
