Another wireless PCMCIA success story

[scap61]

hello world  i'm from italia and
i'm testing a compaq wl110 16bit pcmcia card on my a1200
the card work well on pc
i have inserted the line
Run >NIL: C:CardPatch" to your S:Startup-Sequence file, just after the C:SetPatch line.
but when i test the device with this command
sanautil device prism2.device status
i take this error:
can't open device networks/prism2.device unit
error: device open failure
sanautil: sanautil failed with code 10
can you tell me how i can use card reset ??

thanks

[scap61]

excuse me but i have missed my configuration
a1200 with 3.1 rom (hardware)
o.s. 3.1
blizzard 1240t with 32mb of fast ram
four ide card with idefix with 3 hd and a cdrom
the pcmcia slot i think work well because i have burned a cd with a surfsquirrel and an yamaha scsi burner 8x4x24x

thanks

[scap61]

damn... i have added the line for cardreset but i take the same error

[scap61]

 Does the card look like this?

yes the card is the same

I've read that the Squirrel software takes over the PCMCIA port and stops other PCMCIA drivers working, so you should make sure you don't have it running.

i have disabled 2 items under devs/dosdrivers that use  squirrelscsi.device and now i can read the status of the card and the power led is on

many thanks

now i must configure miami

ciao