KatManDEW wrote:
I found the A2000 power supply pin out online. My supply measures as follows (spec - my measurement)
+5 - +5.18
+12 - +11.83
-12 - -12.12
+5 USER - +5.17
-5 - -10.65
My +12 volts is a little low, at 11.83 volts. Abd my -5 volts is way off.... COuld that be a problem?
Yes, you have a problem: those +5V lines are way too high. They will burn the custom chips, but the PSU is knackered, anyway.
Why don't you swap the guts of this PSU for a regular AT/ATX unit?
Don't
know how? :rtfm:
