Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: Amiga CD32 PAL/NTSC Hardware switch?  (Read 2089 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline rkauer

  • Hero Member
  • *****
  • Join Date: May 2006
  • Posts: 3263
    • Show all replies
Re: Amiga CD32 PAL/NTSC Hardware switch?
« on: October 06, 2008, 02:09:46 AM »
 Follow the pin #41 of Alice, take out the 0 Ohm resistor (PAL/NTSC selector).

 On the Alice side solder a wire to a switch. Add a 4,7k resistor to Vcc (PAL) and on the other pin of the switch, put a 10k resistor with the other pin grounded.

 I don't take responsibility for the hack, be warned.
Logged
Goodbye people.

I\'ll pop on from time to time, RL is acting up.
 

Offline rkauer

  • Hero Member
  • *****
  • Join Date: May 2006
  • Posts: 3263
    • Show all replies
Re: Amiga CD32 PAL/NTSC Hardware switch?
« Reply #1 on: October 06, 2008, 04:56:39 AM »
 The hack only change the screen refresh rate. The video encoding will stand NTSC in the machine.

 For a proper conversion, you need to change the entire video encoding circuit, plus the main crystal.

 LCD TVs are a {bleep} for 50Hz refresh rates (PAL).
Logged
Goodbye people.

I\'ll pop on from time to time, RL is acting up.
 
Pages: [1]   Go Up
« previous next »