Welcome, Guest. Please login or register.

Author Topic: A4000 getting flaky- need a quick checklist  (Read 1789 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline rkauer

  • Hero Member
  • *****
  • Join Date: May 2006
  • Posts: 3263
    • Show all replies
Re: A4000 getting flaky- need a quick checklist
« on: November 16, 2007, 05:51:07 PM »
Quote

Zac67 wrote:
- CPU slot connector
- battery leakage
- PSU (voltages, maybe ripple)
- electrolytic capacitors (leakage, bulging)


 PSU ripple is caused by bad caps, and electrolytic caps can die without bulging. The simple answer (if you do the firsts steps and have a no-go) is: change the caps! It's inexpensive.
Goodbye people.

I\'ll pop on from time to time, RL is acting up.
 

Offline rkauer

  • Hero Member
  • *****
  • Join Date: May 2006
  • Posts: 3263
    • Show all replies
Re: A4000 getting flaky- need a quick checklist
« Reply #1 on: November 16, 2007, 07:35:05 PM »
 Other variables exists in cap's util life: humidity level, for example.

 A place where an air-cooling system is on most the year can dry the electrolitycal innards.

 The better move is swap'em all each 3~5 years.:hammer:

 
Goodbye people.

I\'ll pop on from time to time, RL is acting up.
 

Offline rkauer

  • Hero Member
  • *****
  • Join Date: May 2006
  • Posts: 3263
    • Show all replies
Re: A4000 getting flaky- need a quick checklist
« Reply #2 on: November 17, 2007, 03:45:33 AM »
Quote

CRL wrote:
Hi All-
Thanks for the checklist.


 You're welcome!:-D
Quote

 Anything I need to watch out for as I dig into the PSU?
Thanks for the help- this comunity is the greatest if not the crazyest!
CRL


 Just the caps! :roll:
Goodbye people.

I\'ll pop on from time to time, RL is acting up.