Welcome, Guest. Please login or register.

Author Topic: Bouncing screen problem  (Read 1418 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline rkauer

  • Hero Member
  • *****
  • Join Date: May 2006
  • Posts: 3263
    • Show all replies
Re: Bouncing screen problem
« on: September 01, 2007, 11:27:29 PM »
 Bad electrolytic caps on the mobo AND on the PSU.

 Change all! It's inexpensive (a few caps can be buyed for no more than US$15.00, including those of the PSU).

 Check for oxidation ("rust") on the power conector, too.

Goodbye people.

I\'ll pop on from time to time, RL is acting up.
 

Offline rkauer

  • Hero Member
  • *****
  • Join Date: May 2006
  • Posts: 3263
    • Show all replies
Re: Bouncing screen problem
« Reply #1 on: September 02, 2007, 12:21:28 AM »
Quote

Sparky wrote:
Ahh .. worth a go .. just going to have fun working out types I need though, any pointers ?

Thanks!

Mark


 Look for SMD ones, if you want to keep the machine as original as possible (on the mobo side).

 For the PSU ones, any piece is good enough, but look for 105 celsius grade for lastability/durability/realibility.

Goodbye people.

I\'ll pop on from time to time, RL is acting up.
 

Offline rkauer

  • Hero Member
  • *****
  • Join Date: May 2006
  • Posts: 3263
    • Show all replies
Re: Bouncing screen problem
« Reply #2 on: September 03, 2007, 03:25:52 AM »
 Please tell us what happened after the caps exchange.
Goodbye people.

I\'ll pop on from time to time, RL is acting up.