Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: Amiga 2000 with SCSI and IDE  (Read 3786 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline gertsy

  • Lifetime Member
  • Hero Member
  • *****
  • Join Date: May 2006
  • Posts: 2318
  • Country: au
  • Thanked: 1 times
    • Show all replies
    • http://www.members.optusnet.com.au/~gbakker64/
Re: Amiga 2000 with SCSI and IDE
« on: September 16, 2014, 03:02:48 PM »
Weird, so the SCSI CDROM wont function without the Auto Boot jumper short. But Buddha boots the flash fine.
Could it be a SCSI termination issue for the CDROM?  Perhaps the SCSI HD drive being powered off is screwing the termination or something?
Logged
 

Offline gertsy

  • Lifetime Member
  • Hero Member
  • *****
  • Join Date: May 2006
  • Posts: 2318
  • Country: au
  • Thanked: 1 times
    • Show all replies
    • http://www.members.optusnet.com.au/~gbakker64/
Re: Amiga 2000 with SCSI and IDE
« Reply #1 on: September 20, 2014, 04:05:57 PM »
Quote from: decnet;773474
I've already got a SCSI CD drive but I think you're right about not using this SCSI controller, I've tried everything I can and it won't play ball so I've removed it, which is useful in some ways as it frees up a Zorro slot. If I get another accelerator in the future with a SCSI controller then I'll be able to use the CD drive again.

Thanks for the help everyone.


You can always used an IDE CDROM/DVD with your Buddha as slave.
Logged
 
Pages: [1]   Go Up
« previous next »