Welcome, Guest. Please login or register.

Author Topic: Mediator PCI Busboards  (Read 2312 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline DrDekkerTopic starter

  • Sr. Member
  • ****
  • Join Date: Mar 2006
  • Posts: 325
    • Show all replies
Mediator PCI Busboards
« on: May 02, 2006, 05:39:58 PM »
I'm going to be towerising my A1200 sometime in the near future and just wondering if there's anyone who has experience of either (or both) the Mediator 1200LT4 or Mediator 1200SX busboards?

What I'd ideally like to know is which is the better of the two (apart from the SX having two more PCI slots) and whether the Mediators are compatible with the M-Tech 1230 accelerator.

Also, do the Mediators come complete with through connector for an accelerator?

Cheers

Dekker  
A1200, M-Tec 1230 @28MHz, FPU, MMU, 8Mb fast ram, SCSI card, 512Mb HD, Power CDROM drive, PS2 optical mouse
 

Offline DrDekkerTopic starter

  • Sr. Member
  • ****
  • Join Date: Mar 2006
  • Posts: 325
    • Show all replies
Re: Mediator PCI Busboards
« Reply #1 on: May 02, 2006, 11:38:41 PM »
@Amigakit - thanks for clarifying the issue of the through connector.  I was a little unsure as the advert for the through connector states that one is included with the Mediators, but it's not stated in the adverts for the Mediators!

@Ianoakley - thanks for the advice and info.  I've got quite a bit of old PC 'tat' that may be suitable for use with a Mediator.

For the graphics side I've got an old Voodoo Banshee - possibly not the best of cards, but should still be workable.  I've also got two Voodoo 2000 cards that can be paired up to double the processing power - is it possible to use these in the Mediator?

What kind of performance should I expect from a Voodoo Banshee (16Mb)?  I realise that I won't be able to display games through the card, but will I be able to display hires workbench screens?  If so, this would be great as I could hook up the Amiga to my TFT via the VGA connector to display the 30KHz+ stuff and connect the Amiga's composite out to my PC's PVR2000 tv card and display the 15KHz stuff via the DVI connector (using Winfast TV).

On the audio side I've got the choice of a Creative soundblaster, a Sonic Vortex 2 and an Opti - based card.  Can any of these be used with the Mediator?
A1200, M-Tec 1230 @28MHz, FPU, MMU, 8Mb fast ram, SCSI card, 512Mb HD, Power CDROM drive, PS2 optical mouse
 

Offline DrDekkerTopic starter

  • Sr. Member
  • ****
  • Join Date: Mar 2006
  • Posts: 325
    • Show all replies
Re: Mediator PCI Busboards
« Reply #2 on: May 03, 2006, 12:29:30 AM »
@Amigakit - thanks for the link.  Great to see that there's plenty of PC kit that's supported.

@Humppa - Is the A1200 powered up via the Mediator or is a hacked Amiga power connector still required?

If it is that the A1200 does receive its juice through the Mediator, then this coupled with the two extra PCI slots does make the SX a much more attractive proposition than I first thought (despite its £50 extra cost over the LT4).
A1200, M-Tec 1230 @28MHz, FPU, MMU, 8Mb fast ram, SCSI card, 512Mb HD, Power CDROM drive, PS2 optical mouse