Hey all,
I've got an issue ion my Amiga 3000... I've installed a new HD in my Amiga 3000 via an acard IDE-SCSI bridge... formatted, installed OS 3.1 and then I upgraded to Amiga OS 3.9 boing bag 2.. everything is working quite well, the machine has a Cybervision 64 gfx board so I installed Picasso 96 from http://lilliput.amiga-projects.net/Picasso96.htm, it works quite well however the mouse pointer shows two vertical lines, in a previous install I tried CybergraphX 4 and I had the same issue (even with the latest patches)... sorry if this has been dealt with before but I couldn't find any useful thread.
Does anyone know how to get rid of the problem?
The machine has a Cyberstorm MK II, 128 MB RAM with upgraded Chips: Ramsey 07, Superbuster 11, SuperDMAC 04 and WD SCSI 08.
Comments/Suggestions welcome!
Thank you!
Dragster
I have a similar set up, and a3000 with a CV64/3d (not quite the same) a 3640, a zorram, and a a2065.
I have 3.9 all the lilliput amiga software installed up to the through the unofficial boing bags 3 and 4, and lilliput version of picasso 2.1c
it all works quite well for me. In fact picasso 2.1c seems to be very stable and fast with the CV64/3d.
I had picasso96 2.0 on the system with the CV64/3d. This combo was very slow and would have odd artifacts like you are mentioning (with the pointer) also the screen would have a graphic tearing effect when resolutions were changed).
The CV64/3d is just different enough from the CV64 that mileage may vary.
