Ethernet on an A500 with Bodega Bay

[Motormouth]

I used an A2065 in my A500 + Bodega Bay combo. It worked well and was trivial to setup.
You can go other ways but I think that's the most straight forward and easy option.

+1

I used an A2065 in a slingshot pro (with an A500 HD 8+) without any problems.

Just remember to get a 10baseT to AUI transceiver

[Motormouth]

There is an A2065 on ebay that ends in 4 hours, but it is already over $175

[Motormouth]

@curtis

Weren't you looking for a bridgeboard for this bodega bay configuration.
did you get one?

kinda like Robert17 was mentioning with the golden gate 2+
you could use
Etherbridge12.lha or EmuNet09b.lha both on Aminet
with an ISA ethernet card and your BB.
I bet you could get a really cheap ISA ethernet card.

As for your desire to get a CPU Accelerator, to bad that the Bodega Bay doesn't provide a processor slot.

[Motormouth]

You do not need a golden gate if you already have a bridgeboard.

The Bridgeboard will act as the "bridge" between the Zorro II and ISA slots.