I bought the following CF>IDE adapter from Ebay:
http://cgi.ebay.co.uk/ws/eBayISAPI.d...MEWN%3AIT&rd=1I have tried it with a 32mb and a 1gb CF card with no luck.
I attached it to my A600 system with a 2.5 > 3.5 ide cable and set it to master. HDtoolbox on the WorkBench 2.1 install disk could not see either the 1gb or 32mb.
I tried attaching it to my A1200T system by setting it to slave and putting it on the same IDE channel as my boot HD. Again HDToolBox (OS3.9) could not see either the 32mb or 1gb card.
Why is this?
I have also just put it in my XP machine as a slave and XP detected it and installed it. It worked fine so the actual adapter is not faulty.
