« on: November 04, 2007, 04:04:08 PM »
Some DSL/Cable modems store the MAC Address of whatever HBA you are using, and will block requests from hosts with different MAC Addresses. A power reset of the modem will clear the NVRAM, and then you can use a different HBA. Easiest way around this is to clone the MAC address of one of your HBAs via a switch that supports it prior to routing traffic to the cable modem.
Logged
Primary:
A4000T. Phase5 PPC604e-233mhz/060-66mhz. Mediator, Z3 Fastlane, Voodoo5, Delfina, X-Surf, AD516, Peggy Plus.
Collection:
A4000D, A1200, A500, Milan060 (Atari clone), Atari MegaSTE, Atari TT030, C64, C128, Mattel Aquarius, (2) HP Jornada....
