PPC Problem

[stopthegop]

Anyone know why my PPC all of a sudden is showing up as 0 (zero) Mhz?  :<  It can't be a cooling problem (I have two 12v fans blowing right on top of it + massive heatsink).  Can this be fixed or is my PPC dead?  Maybe just the oscillator just went dead for no reason?  Here is the output from whichamiga:  



WhichAmiga 1.3.3 (2.5.99)
Written by Harry "Piru" Sintonen. Copyright © 1995-1999 PitPlane Productions.

Evaluating system...
Central Processing Unit: MC68060 63.4 MHz (rev 6)
 1 PowerUP Processor(s): PPC 604e 0 MHz (rev 2.4), 0 MHz busclock
    Floating Point Unit: 68060fpu
 Memory Management Unit: 68060mmu running
   Custom graphics chip: AGA Lisa 4203 (rev 0)
  Custom animation chip: AGA NTSC Alice 8374, rev 3-4
   Other custom chip(s): Paula 8364 (rev 0), Ramsey (rev 15), Gary (rev 0)
        Graphics system: Picasso96
         Hardware Clock: not available
 Max. Chipmem available: 2032 K
 Max. Fastmem available: 134144 K
       ROM chip version: 40.68 (Kickstart 3.1)
  ReKicked ROM, version: 45.57 (Kickstart unknown)
      Workbench version: 45.3 (Workbench unknown)
       SetPatch version: 44.38

 Your computer is an Amiga 4000.
 
 

[stopthegop]

I had that jumper open and I closed it like you suggested.  No dice so far..  I'm fiddling with WarpOS settings to see if anything there might be afu.  

[stopthegop]

The demo crashes my machine.  I can run, for example, Imagine 5.17, and it can "detect" the PPC in the "about.." requester. But thats as far as I get.  As soon as I try to do a render that actually uses the PPC, it crashes.  Same with Hollywood, AmigawriterPPC, MoovidPPC, Fantastic Dreams..  Not sure what happened.. Either way, this sucks.    

[stopthegop]

pparently it isn't dead after all!  This is the output from various tools provided with WarpOS (warpstate, showinfo, stat, etc..).  Everything here is saying the PPC is ok.. at least I think so?  BTW, my PPC applications started working after I typed "dcon".  The only "problem" I'm having now is with whichamiga.  It still shows only the 68060, no PPC.  Why would that be?  Also, scout crashes when I query the "system" button so I'm not able to tell whether Scout sees the PPC side or not.  



7.Ram Disk:WarpUP-WarpOS/tools> ppcstate
PPC is in power save mode   : YES
PPC applications are active : YES
PPC application is running  : NO
7.Ram Disk:WarpUP-WarpOS/tools> showinfo
CPU:                   PPC 604E   (PVR = 00090204)
CPU clock:             233.333333 MHz
Bus clock:             66.666666 MHz
Instruction Cache:     ON and UNLOCKED
Data Cache:            ON and UNLOCKED
Page table location:   09200000
Page table size:       2048 KBytes
Time base content:     0000003C 7ED88158
CPU load:              0.00%
System load:           0.00%
7.Ram Disk:WarpUP-WarpOS/tools> stackppc
The current PPC stack size is: 20484096 bytes
7.Ram Disk:WarpUP-WarpOS/tools> warpstat
7.Ram Disk:WarpUP-WarpOS/tools> stat

Task statistics:

Task name                 ID     NICE  CPUusage  Busy      Activity
-------------------------------------------------------------------
Enterprise                    1     0     0.00%     0.00%     0.00%
Voyager                       2     0     0.00%     0.00%     0.00%
ProcessManagerPPC           101     0     0.00%     0.00%     0.00%
ramlib_PPC                  136     0     0.00%     0.00%     0.00%
Shell Process_PPC7          154     0     0.22%     0.24%     0.22%

CPU load:         0.22%
System load:      0.24%