« on: November 16, 2006, 07:53:15 AM »
Most SCSI controllers that I have used generally use SCSI ID 0 as the controllers ID on the chain. All other SCSI devices on the chain must have a different ID set.
That said, SCSI controllers do not always use 0 as thier SCSI ID, so you'll have to figure that out by testing.
If it's SCSI 2 you have ID 0 to 7 available.
If ID 0 is used for the controller, you'll have 1-7 still available. In which case, you should be able to set any ID from 1-7 on you HDD.
I don't think thats right. ID zero is ok to use. ID seven is the one to avoid. Adaptec, Emulex and Q-logic controllers -- to my knowledge -- all reserve seven as the HBA's ID number.
Logged
Primary:
A4000T. Phase5 PPC604e-233mhz/060-66mhz. Mediator, Z3 Fastlane, Voodoo5, Delfina, X-Surf, AD516, Peggy Plus.
Collection:
A4000D, A1200, A500, Milan060 (Atari clone), Atari MegaSTE, Atari TT030, C64, C128, Mattel Aquarius, (2) HP Jornada....
