Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: SCSI drive + Cyberstorm PPC problems  (Read 4093 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline stopthegop

  • Hero Member
  • *****
  • Join Date: Feb 2006
  • Posts: 831
    • Show all replies
Re: SCSI drive + Cyberstorm PPC problems
« on: July 29, 2006, 06:36:16 AM »
Do these two things:
1.Replace the SCSI cable (Parity/geometry errors). Get the shortest one possible.  
2.Disable TERM_PWR on the disk.


This will solve your problems.  
Logged
Primary:
A4000T. Phase5 PPC604e-233mhz/060-66mhz. Mediator, Z3 Fastlane, Voodoo5, Delfina, X-Surf, AD516, Peggy Plus.

Collection:
A4000D, A1200, A500, Milan060 (Atari clone), Atari MegaSTE, Atari TT030, C64, C128, Mattel Aquarius, (2) HP Jornada....
 

Offline stopthegop

  • Hero Member
  • *****
  • Join Date: Feb 2006
  • Posts: 831
    • Show all replies
Re: SCSI drive + Cyberstorm PPC problems
« Reply #1 on: August 09, 2006, 10:44:59 PM »
Quote

x56h34 wrote:
I think it's the Atlas drive that is not very CSPPC friendly. I've had similar problems in the past with that same drive, and once I switched to a Seagate Barracuda problems dissapeared. I've had best success with IBM U160 or better SCSI drives and CSPPC. They always work fine with CSPPC and would give speeds close to the theoretical limit (30 to 35MB/s, so pretty close to the 40MB theoretical limit).

EDIT: Fujitsu U160 or better SCSI drives also work great with CSPPC, from my experience.



This is consistent with my experiences using the cstorm.
Logged
Primary:
A4000T. Phase5 PPC604e-233mhz/060-66mhz. Mediator, Z3 Fastlane, Voodoo5, Delfina, X-Surf, AD516, Peggy Plus.

Collection:
A4000D, A1200, A500, Milan060 (Atari clone), Atari MegaSTE, Atari TT030, C64, C128, Mattel Aquarius, (2) HP Jornada....
 
Pages: [1]   Go Up
« previous next »