Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: Using A3000's internal SD/FF with CV64/3D  (Read 1871 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline McVencoTopic starter

  • Hero Member
  • *****
  • Join Date: Feb 2006
  • Posts: 1428
    • Show all replies
    • http://www.amigascene.nl
Using A3000's internal SD/FF with CV64/3D
« on: September 14, 2007, 08:57:13 PM »
I a short while I will receive my A3000 which I bought from a very friendly German guy, and I plan to put in my Cybervision 64/3D in that machine. Now is my question: can I use the internal SD/FF from the A3k in combination with that card, and if so: how? What should I connect where, or do I just plug in a TFT monitor to the 31kHz output on the back of the A3k?

Somebody enlighten me in this matter please...
Logged
| A4000 | CS-MK3 060@50 | Picasso IV |
| Member of Team Amiga (tm) | FidoNet 2:286/414.18 (long ago) |
| SysOp The Missing Channel BBS | Member of AGA BBS Intl. |
 

Offline McVencoTopic starter

  • Hero Member
  • *****
  • Join Date: Feb 2006
  • Posts: 1428
    • Show all replies
    • http://www.amigascene.nl
Re: Using A3000's internal SD/FF with CV64/3D
« Reply #1 on: September 15, 2007, 05:31:50 PM »
Are there any other RTG cards which WILL work with the onboard SD/FF from the A3k, or do they all need a separate SD/FF? In short: does the onboard 31 kHz output work only with the Amiga native modes?
Logged
| A4000 | CS-MK3 060@50 | Picasso IV |
| Member of Team Amiga (tm) | FidoNet 2:286/414.18 (long ago) |
| SysOp The Missing Channel BBS | Member of AGA BBS Intl. |
 
Pages: [1]   Go Up
« previous next »