EClock's precision with longer time periods...

[Jose]

Hi. The device's manual only states that EClock is the highest precision unit on the Amiga. But regarding VBlank it states that it can have higher precision than MicroHz  and Eclock.  So what's the limit that one should use EClock in favour of VBlank  :-?

[Edit] Yes, I put this question in another thread but I think it deserves it's own one, the RKM Devices should be more clear about that IMHO

[Jose]

@Piru
Hey 8-) Well, I'm reading the RKM Devices on the DevCD2.1 (the HTML version). Never saw what you posted there on the timer device chapter.

What I said above I found on: reference/HTML/Devices_Manual_guide/node00C0.html

It says, regarding VBLANK:
"The VBLANK timer unit is very stable and has a granularity comparable to the vertical blanking time. When you make a timing request, such as "signal me in 21 seconds," the reply will come at the next vertical blank after 21 seconds have elapsed. this timer has very low overhead and may be more accurate then the MICROHZ and ECLOCK units for long time periods. Keep in mind that the vertical blanking time varies depending on the display mode."

And regarding ECLOCK:
"The ECLOCK timer unit uses the Amiga E-Clock to measure the time interval you request. This is the most precise time measure available through the timer device"

That's all I can find there and I've read the whole chapter about the timer device. Maybe the HTML version lacks some things ? I'm using it cause my Amigas don't have CDROM ATM...