Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: Help with picoatx on amiga1200 board: the screen goes on and off  (Read 2419 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline broken

  • Full Member
  • ***
  • Join Date: Feb 2006
  • Posts: 240
    • Show all replies
Re: Help with picoatx on amiga1200 board: the screen goes on and off
« on: November 19, 2013, 05:03:31 AM »
Sounds to me like picopsu itself might be defective. Have you tested the pico on an atx motherboard yet? Or just Amigas?


I use to use a 80 watt pico on my A1200 without issue. It has a FastATA interface with 32 GB flash storage and Blizzard 1260 accelerator. Worked fine.  

Also as an FYI my setup only drew about 21 watts from the wall.
Logged
 

Offline broken

  • Full Member
  • ***
  • Join Date: Feb 2006
  • Posts: 240
    • Show all replies
Re: Help with picoatx on amiga1200 board: the screen goes on and off
« Reply #1 on: November 19, 2013, 08:45:38 PM »
Quote from: superfrog76;753031
Also is your PicoPSU purchased trough the original maker site or did you got it via 3rd party? (I have purchased it via Amazon; I may have a crappy clone since it doesn't say "picopsu" and "patent pending" like the pictures on the PicoPSU site)

Thanks!


I bought mine from an authorized reseller.

If yours doesn't have the patent pending markings on it, then it's a bootleg.




Sadly there are many bootleg versions of the Pico out there.
Logged
 
Pages: [1]   Go Up
« previous next »