Author Topic: Help putting accellerator in my A1200 (Read 3648 times)

drewz21 · « **on:** May 05, 2006, 01:58:25 PM »

I just got a Blizzard 1260 with 64MB RAM from AmigiKit.com (Great company by the way) and I installed it last night but when I boot up I get a software error and the computer will never come up. I tried removing the 64MB RAM and got the same error. The computer boots up fine with the card removed.

I have an Amiga 1200 with 3.1 ROM's and 3.1 Workbench and a 4GB hard drive.

Any help would be appreciated.

drewz21 · « **Reply #1 on:** May 05, 2006, 03:01:59 PM »

Thanks for the suggestions. I'll try it out tonight.

drewz21 · « **Reply #2 on:** May 05, 2006, 07:21:19 PM »

Thanks for all the advice. I'll try things out tonight and let you know.

Wish I could leave work early on this Friday!

drewz21 · « **Reply #3 on:** May 05, 2006, 09:51:30 PM »

I'm using an older more powerful A500 power supply. I've purchased several A500 power supplies from Ebay to keep as spares.

I wish I had bought that Bigfoot that was on Ebay a short while back.

drewz21 · « **Reply #4 on:** May 06, 2006, 04:44:35 AM »

Ok, it's working like a charm!

In my haste to get my A1200 up and running with this great new card, I did not install the software from the floppy disk supplied by AmigaKit.com first.

Thanks to everyone for their suggestions. Now it's playtime!

Author Topic: Help putting accellerator in my A1200 (Read 3648 times)

drewz21

Help putting accellerator in my A1200

drewz21

Re: Help putting accellerator in my A1200

drewz21

Re: Help putting accellerator in my A1200

drewz21

Re: Help putting accellerator in my A1200

drewz21

Re: Help putting accellerator in my A1200