I got my Blizzard PPC, questions about cooler and idefix xpress

[balrogsoft]

Hi, i finally got my Blizzard PPC 603e with 060/50mhz, 603/240mhz, SCSI, and 96 mb of RAM. But i can try it until this weekend. The cooler wasn't fixed and i removed, then i saw the PPC, and the cooler has very few thermal paste, i use some of the paste around the processor (outside the little metal piece), and i put it on the cooler, here are the photos:

My Blizzard PPC:
http://www.balrogsoftware.com/amiga/blizzard1.jpg

PPC processor with thermal paste and the metal piece:
http://www.balrogsoftware.com/amiga/blizzard2.jpg

Then i put on the cooler some of the paste that i got around the little metal piece:
http://www.balrogsoftware.com/amiga/blizzard3.jpg

And this is the PPC processor after put cooler (i removed to see if the paste was working, and i saw on the metal piece some of the paste i put on the cooler):
http://www.balrogsoftware.com/amiga/blizzard4.jpg

It will be sufficient thermal paste? i have more, but i can get it until the weekend.

I received an IdeFix Express and a SCSI CDRW unit, i have an IdeFix Express already on my A1200, i want to put it on my A600, Gayle chip of A600 will be compatible with the express socket? and using only Idefix, without the express socket?

Thanks in advance.

[balrogsoft]

Hi, thanks for your help, i cleaned the rest of thermal paste before apply the paste i got around the metal piece of PPC, i applied a thin layer to the cooler.