IDE-FIX troubles

[blobrana]

>>don´t know how to change master/slave config

There are no jumpers on the back of the cdrom? (like on the back of the HD)

if you press the Left mouse button on boot is there an IDE prefs program launched? (with options to choose)

on my system i`ve got:
Device = scsi.device  (note the small letters!)
FileSystem   = L:CDFileSystem (or FileSystem = L:AmiCDFS)
   
blab blah
Buffers      = 5
BufMemType   = 0
StackSize   = 1000
Priority   = 10

Unit      = 2 (edit to something else)
 Mask = 0x7fffffff
        GlobVec = -1
       Priority = 10
        DosType = 0x43444653
      StackSize = 600
          Mount = 1

        Control = "LC BL=8 FB=32"


 * Control field template:
 *
 * LC=LOWERCASE/S,CS=CASESENSE/S,
 * HF=HFSFIRST/S,TD=TRACKDISK/S,
 * BL=BUFFERLINES/K/N,FB=FILEBUFFERS/K/N,
 * DC=DISKCHANGE/K/N,MT=MOTORTIME/K/N,
 * SD=STARTDELAY/K/N,TDC=TDCHANGE/S,
 * TOSHIBA/S,OLDMODE/S
 */
 */

[blobrana]

Hum,

doesn`t the 1200 have the newer version of scsi.device installed??

[color=6699CC][/color]
if no jumpers then it must be hard wired to , i guess, unit 2...(try other numbers though- when you edit the CDO: tooltypes...) and i guess that its  set as a slave...(on same ide cable as HD)

But if it's a master then you'll need to use another separate IDE cable
[color=6699CC][/color]


on my system i`ve got:
Device = scsi.device (case sensitive - note the small letters!)
FileSystem = L:CDFileSystem (or FileSystem = L:AmiCDFS)

blab blah
Buffers = 5
BufMemType = 0
StackSize = 1000
Priority = 10

Unit = 2 (edit to something else)
Mask = 0x7fffffff
GlobVec = -1
Priority = 10
DosType = 0x43444653
StackSize = 600
Mount = 1

Control = "LC BL=8 FB=32"


* Control field template:
*
* LC=LOWERCASE/S,CS=CASESENSE/S,
* HF=HFSFIRST/S,TD=TRACKDISK/S,
* BL=BUFFERLINES/K/N,FB=FILEBUFFERS/K/N,
* DC=DISKCHANGE/K/N,MT=MOTORTIME/K/N,
* SD=STARTDELAY/K/N,TDC=TDCHANGE/S,
* TOSHIBA/S,OLDMODE/S
*/
*/

[blobrana]

Hum,

Try to download AmiCDFS (V2.14)

And change those tooltypes FileSystem = L:aMiCdFs etc...