New AmigaOS 4.1 Classic Users

[CSixx]

I received my copy today (thanks AmigaKit!).
I was lucky and found five ESS solo-1 cards at work and brought them home for testing.

I removed my Voodoo card, and my 8139 nic, slapped in the radeon card and booted from the floppy boot disk.

The install was straight-forward, and OS4 is working fine so far.

However I cannot get any of the solo sound cards to work. In AHI prefs, the test sound button plays a nice clear tone via paula. But no sound at all through any of the solo cards. At one point, I did get some sound out of one of the cards, but it played whitenoise when the test sound button was pressed instead of the tone. When swapping through the cards a second time, I was unable to even get the whitenoise again.

Showconfig shows the model1969 card installed and lists it as working.

I haven't tried USB (Subway) yet.
(I'm glad I have a three-day weekend coming up)

I also haven't had any time to actually play with OS4, but I'm impressed with the speed so far. It runs extremely well on my BPPC, everything seems very responsive. (330mhz card from Stachu)

Hopefully I can get this sound card issue worked out, and round up a compatable nic card.
Any ideas on getting the solo card working AmigaKit?

[CSixx]

Can the mods please prune the garbage from this thread? (and preferably the site)...

Here are a couple pics of the sound card I'm working with.
Doesn't seem to work in OS4.1C

[CSixx]

Can you get me the Device ID / Vendor ID from the Ranger utility?

It should show up in Ranger, if you can either give me the numbers or give me a screenshot of the PCI output from Ranger I may be able to get support added for it.

Thanks

Absolutely, I will get that this evening once I get home. Thanks.

[CSixx]

Can you get me the Device ID / Vendor ID from the Ranger utility?

HammerD, attached is a pic from ranger regarding my ESS card.
Let me know if anything else would help.

[CSixx]

AmigaKit: Is Subway supported?
I've tried a couple flash drives and nothing happens when I plug them in.
There's not much in the USB prefs, other than some logging info. USBInspector shows nothing.

No USB would be a deal breaker for me using OS4.

[CSixx]

Thanks, I'll give Poseidon a try. Just the standard 3.x version right? Do I need to disable the OS4 stack or anything first?