As before in another thread on MiniMIG, the issue with USB host on the present Minimig PCB would be the lack of CPU MIPs (the slow clock speed of the 68SEC000 CPU) and lack of spare FPGA I/O pins. A seperate CPU on a USB HOST controller such as the FTDI Vinculum USB HOST controller might work becasue it has a seperate CPU of its own running the USB stack although we would have to use a SPI interface to connect to it since we only have 4 spare FPGA I/O pins on J9 Spare I/O header. The speed of a serial SPI connection from 68K/Xilinx_FPGA would most likely limit the bandwidth/transfer rate. Data sheet has Vinculum SPI port max SPI Clock = 10Mhz => 10Mbits/sec Max SPI transfer rate (if no signal integrity issues arise). A FTDI Vinculum USB HOST controller small daughtercard that connected to MiniMIG1 Spare I/O header J9 could be built. We may have enough 68K CPU MIPS to handle this kind of implementation. Would anyone be willing to provide some Amiga driver software for MiniMIG/FTDI Vinculum USB HOST controller to support such a scheme ?
http://www.vinculum.com/ :-)
