X-Surf Network Card Problem

[mjc4513]

Any one have any experience with X-Surf cards - I cannot seem to get the one I have to work. It may be the card as the test program that comes on the CD indicates it cannot find the PnP ISA card or the RTL8019? I'm just wondering if anyone has had any experience with them and could give some guidence - thanks!

[mjc4513]

I do have the x-surf.device in DEVS:Networks - when I try to startup Genesis using the device I get this error

iface_init: could not open Workbench:Devs/Network/x-surf.device unit 0

[mjc4513]

The early startup menu shows the card as working and when I plug a network connection in it lights up.

This is the output of the test program

-------------------------------------
>>xsurftest
xsurf testprg V1.2 (13.12.1999)

Searching for xsurf card (VEN_ID=4626, PROD_ID=23)....found
Board address = 0xe90000

ISA Plug and Pray [ähm] Play setup...
No PnP card found!!

Searching for RTL8019 at 0x300...not found!
------------------------------------

I have tried the board in an A4000 in multiple slots and an A3000 multiple slots and the same thing in both.

I have had other boards in the same slots and they work...

The PLCC socketed IC you are talking about is on the bridge board correct - that is the only part of the card the system seems to know exists. There is either something wrong with the network card or the contacts between the cards?? Any other suggestions?

Thanks!!!!