Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: Non booting A4000 when PicassoIV installed!!!  (Read 3927 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline MastaTabs

  • Jr. Member
  • **
  • Join Date: Dec 2005
  • Posts: 75
    • Show all replies
    • http://www.sophisticated-development.de/
Re: Non booting A4000 when PicassoIV installed!!!
« on: July 20, 2006, 02:48:19 PM »
If the card blocks the machine with the 8 pinners removed, its a sign that the FPGA is dead.

So just to check that its not. Remove them. Sure, the card wont work without them.

regs
MastaTabs
Logged
 

Offline MastaTabs

  • Jr. Member
  • **
  • Join Date: Dec 2005
  • Posts: 75
    • Show all replies
    • http://www.sophisticated-development.de/
Re: Non booting A4000 when PicassoIV installed!!!
« Reply #1 on: July 20, 2006, 03:58:26 PM »
I have no problems with a 3640 either with or without FPU. Well, its a rev. 3.2 card.

And its always a good idea to upgrade older 3640s to that revision.

regs
MastaTabs
Logged
 

Offline MastaTabs

  • Jr. Member
  • **
  • Join Date: Dec 2005
  • Posts: 75
    • Show all replies
    • http://www.sophisticated-development.de/
Re: Non booting A4000 when PicassoIV installed!!!
« Reply #2 on: July 21, 2006, 09:54:39 AM »
You need an update of the PCI bridge if its not already rev. 4.

I can provide it if you like.

Actually the problem with the A4091 is related to a Buster bug. It is highly recommended to use a Buster rev. 11 with such a setup, means with DMA ZorroIII PICs.

regs
MastaTabs
Logged
 
Pages: [1]   Go Up
« previous next »