Cable adapters for CS MKIII scsi

[motorollin]

Can anybody tell me what adapter I need to connect a 50 way ribbon to the SCSI connector on the CS?

Thanks

--
moto

[motorollin]

Looks like replacing the cable would be the best way, otherwise every device including the controller would have an adapter! Just so I know I get the right cable, is it a 68 way D cable I need?

--
moto

[motorollin]

d0pefish wrote:
Yeah mate, that's the one.

Does this one look ok? It seems to have a terminator built in!

d0pefish wrote:
I am using a nice rounded cable - with a bit of "arranging", it curls up reasonably well underneath the hard disk.

That one I linked is rounded. Hopefully it will be ok as the only other ones I can find are Akasa, which are really expensive!

d0pefish wrote:
Don't forget you also need two proper active terminators; both ends of the chain need terminating.

Doesn't the controller terminate one end? Also would the terminator on the cable I linked do the job?

Thanks for your help :-)

--
moto

[motorollin]

AmigaKit roxxorzzzzzz!!!11!!!
;-)

--
moto

[motorollin]

Thanks for the info. I had no idea SCSI terminators were so scary! :-) I've PMed AmigaKit to see if they can supply me with the correct ones, as I don't want to destroy the nice MKIII you spent such a long time packaging up :-)

--
moto