Welcome, Guest. Please login or register.

Author Topic: CF Card Recognition  (Read 2216 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline motorollin

  • Hero Member
  • *****
  • Join Date: Nov 2005
  • Posts: 8669
    • Show all replies
Re: CF Card Recognition
« on: January 21, 2006, 06:44:38 PM »
Is there anything else on the IDE cable with the flash drive? I had a cheap flash drive and it would only work if it was the only device on the cable.

--
moto
Code: [Select]
10  IT\'S THE FINAL COUNTDOWN
20  FOR C = 1 TO 2
30     DA-NA-NAAAA-NAAAA DA-NA-NA-NA-NAAAA
40     DA-NA-NAAAA-NAAAA DA-NA-NA-NA-NA-NA-NAAAAA
50  NEXT C
60  NA-NA-NAAAA
70  NA-NA NA-NA-NA-NA-NAAAA NAAA-NAAAAAAAAAAA
80  GOTO 10
 

Offline motorollin

  • Hero Member
  • *****
  • Join Date: Nov 2005
  • Posts: 8669
    • Show all replies
Re: CF Card Recognition
« Reply #1 on: January 21, 2006, 07:36:17 PM »
Does anything show up on scsi.device unit 0 in HDToolBox when the device is set to master? If not, try RDPrep (rdp391.lha on Aminet).

--
moto
Code: [Select]
10  IT\'S THE FINAL COUNTDOWN
20  FOR C = 1 TO 2
30     DA-NA-NAAAA-NAAAA DA-NA-NA-NA-NAAAA
40     DA-NA-NAAAA-NAAAA DA-NA-NA-NA-NA-NA-NAAAAA
50  NEXT C
60  NA-NA-NAAAA
70  NA-NA NA-NA-NA-NA-NAAAA NAAA-NAAAAAAAAAAA
80  GOTO 10
 

Offline motorollin

  • Hero Member
  • *****
  • Join Date: Nov 2005
  • Posts: 8669
    • Show all replies
Re: CF Card Recognition
« Reply #2 on: January 21, 2006, 08:42:30 PM »
How long did you leave it to get to the kickstart screen? It can take a long time with an unformatted disk attached to the IDE interface. (>30 seconds).

I actually had exactly the same problem with an IDE flash drive, but mine was connected to a 4 way buffered interface so my situation was a bit different.

--
moto
Code: [Select]
10  IT\'S THE FINAL COUNTDOWN
20  FOR C = 1 TO 2
30     DA-NA-NAAAA-NAAAA DA-NA-NA-NA-NAAAA
40     DA-NA-NAAAA-NAAAA DA-NA-NA-NA-NA-NA-NAAAAA
50  NEXT C
60  NA-NA-NAAAA
70  NA-NA NA-NA-NA-NA-NAAAA NAAA-NAAAAAAAAAAA
80  GOTO 10